Industrial 4MT Geared Head Drilling Machine - GHD-55G

The GHD-55G is our big boy Industrial Geared Head Drilling Machine that has it all, and if you are wanting the best of the best to drill small holes up to large holes, then look no further as this will be what you will need in your engineering workshop. With a hefty 4 morse taper spindle that can travel a huge 180mm in depth, and the extra-large head to house in those big drive gears with 16 speeds to drill through the toughest steels with ease. This machine also features an automatic drilling feed system, so you do not need to use human force at all to drill any holes.

More features are added into this all-rounder drilling machine to help save the operator from using human power, by simply engaging the gear drive from hand mode then using the push buttons for the motorised work table to raise or lower to optimum height required. The work table also can rotate 360º, and tilts 90º left & 90º right to accommodate multitudes of endless drilling possibilities. Another notable and very useful feature to mention is that tapping holes can be achieved easily by selecting this function on the control panel, setting the depth stop and appropriate spindle speed, and once the tapping depth is reached the spindle will automatically revere and your tap will retract out of the hole.